MATERIAL SAFETY DATA SHEETS
MSDS No: 563-46-2
|SUPPLIER ADDRESS:||6141 Easton Road, Bldg. 1|
PO Box 310
Plumsteadville, PA 18949-0310
|EMERGENCY PHONE NUMBER:||(215) 766-8861|
|2. COMPOSITION, INFORMATION ON INGREDIENTS|
|Ingredient Name||Formula||CAS #||Concentration|| ACGIH TLV || OSHA PEL || MAC || Other STEL |
|Note: ||NE = NONE ESTABLISHED||S/A = SIMPLE ASPHYXIANT|
|3. HAZARD INDENTIFICATION|
* * * EMERGENCY OVERVIEW * * *
Flammable liquid and vapor.
Can form explosive mixtures with air.
Can cause anesthetic effects.
POTENTIAL HEALTH EFFECTS
ROUTES OF ENTRY: Inhalation , Ingestion
ACUTE EFFECTS: Material acts as a simple asphyxiant by displacing air necessary for life. Can be irritating to the eyes, skin, and respiratory tract. Overexposure may cause nausea, headache, dizziness, vomiting and weakness.
CHRONIC EFFECTS: None known
MEDICAL CONDITIONS AGGRAVATED BY OVEREXPOSURE: None known
OTHER EFFECTS OF OVEREXPORSURE: None
CARCINOGENICITY (US ONLY):
NTP - No
IARC MONOGRAPHS - No
OSHA REGULATED - No
INHALATION: Immediately remove victim to fresh air. If breathing is difficult, give oxygen. If breathing has stopped, give artificial respiration.
EYE CONTACT: Immediately flush with copious amounts of water for at least 15 minutes.
SKIN CONTACT: Immediately flush with copious amounts of water for at least 15 minutes while removing contaminated clothing.
INGESTION: Wash out mouth with water.
IN EVENT OF EXPOSURE, CONSULT A PHYSICIAN
NOTE TO PHYSICIAN: None
|5. FIRE FIGHTING MEASURES|
FLASH POINT: <-30 deg. C
AUTOIGNITION TEMPERATURE: N/Av
EXTINGUISHING MEDIA: Carbon dioxide, foam, or dry chemical. Water may be effective for cooling cylinders, but may not effect extinguishment.
SPECIAL FIRE FIGHTING INSTRUCTION AND EQUIPMENT: Wear self-contained breathing apparatus and full protective clothing. Keep fire exposed cylinders cool with water spray.
HAZARDOUS COMBUSTION PRODUCTS: Carbon oxides and acrid smoke.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Cylinder rupture may occur under fire conditions. May form explosive mixture in air. Vapors may travel a considerable distance to the source of ignition and flash back.
|6. ACCIDENTAL RELEASE MEASURES|
CLEAN UP PROCEDURES: Evacuate and ventilate area. Remove leaking cylinder to exhaust hood or safe outdoor area. Remove all sources of ignition. Cover with an activated carbon adsorbent, take up, and place in closed containers for disposal.
SPECIALIZED EQUIPMENT: None
PRECAUTIONS TO BE TAKEN IN HANDLING: Secure cylinder when using to protect from falling. Use suitable hand truck to move cylinders.
PRECAUTIONS TO BE TAKEN IN STORAGE: Store in well ventilated areas. Keep valve protection cap on cylinders when not in use. Store away from oxidizers, combustible materials, and source of ignition or heat.
|8. EXPOSURE CONTROLS / PERSONAL PROTECTION|
ENGINEERING CONTROLS: Provide adequate general and local exhaust ventilation to maintain concentrations below flammable limits.
EYE / FACE PROTECTION: Goggles. A safety shower and eyewash station should be readily available.
SKIN PROTECTION: Wear suitable protective clothing.
RESPIRATORY PROTECTION: Use a self-contained breathing apparatus in case of emergency or non-routine use.
OTHER PROTECTIVE EQUIPMENT: Safety shoes when handling cylinders.
|9. PHYSICAL AND CHEMICAL PROPERTIES|
PHYSICAL PRESSURE: Liquid
VAPOR PRESSURE: @37.7 deg. C: 951 mm Hg
VAPOR DENSITY (AIR=1): 2.4
BOILING POINT (C): 31
SOLUBILITY IN WATER: Insoluble
SPECIFIC GRAVITY (H2O=1): @20 deg. C: .65O
EVAPORATION RATE: N/Av
ODOR THRESHOLD: N/Ap
|10. STABILITY AND REACTIVITY|
STABILITY: Stable under normal storage conditions.
CONDITIONS TO AVOID: Storage in poorly ventilated areas. Avoid heat, ignition sources, and oxidizers.
MATERIALS TO AVOID: Strong oxidizing agents.
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION: Thermal oxidative decomposition can produce carbon oxides and acrid smoke.
|11. TOXICOLOGICAL INFORMATION|
LETHAL CONCENTRATION (LC50): NONE ESTABLISHED
LETHAL DOSE 50 (LD50): N/Ap
REPRODUCTIVE EFFECTS: N/Ap
|12. ECOLOGICAL INFORMATION|
No adverse ecological effects are expected.
|13. DISPOSAL CONSIDERATIONS|
WASTE DISPOSAL METHOD: Dispose of non-refillable cylinders in accordance with federal, state and local regulations. Allow gas to vent slowly to atmosphere in an unconfined area or exhaust hood. If the cylinders are the refillable type, return cylinders to supplier with any valve outlet plugs or caps secured and valve protection caps in place.
|14. TRANSPORT INFORMATION|
DOT DESCRIPTION (US ONLY):
PROPER SHIPPING NAME: 2-Methyl-1-Butene
HAZARD CLASS: 3 (flammable), Packing group I
INDENTIFICATION NUMBER: UN2459
REPORTABLE QUANTITIES: None
LABELING: FLAMMABLE LIQUID
ADR / RID (EU Only): Class 3, 1(a)
SPECIAL PRECAUTIONS: Cylinders should be transported in a secure upright position in a well ventilated truck.
|15. REGULATORY INFORMATION|
OSHA: Process Safety Management: Material is not listed in appendix A of 29 CFR 1910.119 as highly hazardous chemical.
TSCA: Material is listed in TSCA inventory.
SARA: The threshold planning quantity for material is 10,000 lbs.
EU NUMBER: N/Av
NUMBER IN ANNEX 1 OF DIR 67/548: Not listed in annex 1.
EU CLASSIFICATION: N/Av
OTHER PRECAUTIONS: Protect containers from physical damage. Do not deface cylinders or labels. Cylinders should be refilled by qualified producers of compressed gas. Shipment of a compressed gas cylinder which has not been filled by the owner or with his written consent is a violation of federal law (49 CFR).
ABBREVIATIONS: N/Ap - Not Applicable N/Av - Not Available SA - Simple Asphyxiant NE - None Established
DISCLAIMER: Information included in this document is given to the best of our knowledge, however, no warranty is made that the information is accurate or complete. We do not accept any responsibility for damages by the use of the document.